Takardar bayanai:8060
8060-TDS-Turanci
8060wakili ne mai haɗaɗɗiyar haɗin gwiwa tare da babban aiki. Yana iya yin polymerize lokacin da aka ƙara radicals kyauta don samar da kwayoyin halitta (kamar photoinitiators) ko lokacin da aka fallasa su zuwa radiation ionizing. 8060 yana da kyakkyawar dilution dukiya ga kowane irin oligomers (polyurethane acrylate, polyester acrylate, epoxy acrylate, da dai sauransu), musamman a cikin UV curing dabara na itace, tawada, takarda da kuma bugu.
Sunan sinadarai:Ethoxylated Trimethylolpropane Triacrylate
Tsarin kwayoyin halitta:
CAS No.28961-43-5
Monomer maras Benzene
Kyakkyawan taurin
Kyakkyawan sassauci
Low fata hangula
Tawada: bugu na biya, flexo, allon siliki
Rubutun: karfe, gilashi, filastik, PVC, itace, takarda
Adhesive agenta
Wakilin juriya mai haske
| Bayyanar (Ta hanyar hangen nesa) | Share ruwa | Mai hanawa (MEHQ, PPM) | 180-350 |
| Danko (CPS/25C) | 50-70 | Abun ciki (%) | ≤0.15 |
| Launi (APHA) | ≤50 | Indexididdigar raɗaɗi (25 ℃) | 1.467-1.477 |
| Ƙimar acid (MG KOH/g) | ≤0.2 | Musamman nauyi (25 ℃) | 1.101-1.109 |
Da fatan za a kiyaye wuri mai sanyi ko bushe, kuma ku guji rana da zafi;
Yanayin ajiya bai wuce 40 ℃, yanayin ajiya a ƙarƙashin al'adasharadi na akalla watanni 6.
Ka guji taɓa fata da tufa, sanya safar hannu masu kariya lokacin sarrafa;
Zuba da zane lokacin da ya zubo, kuma a wanke da ethyl acetate;
don cikakkun bayanai, da fatan za a koma zuwa Umurnin Tsaro na Abu (MSDS);
Kowane rukuni na kayan da za a gwada kafin a sanya su cikin samarwa.
